产品介绍
产品特点/Features:
◆采用单机头设计，经济实惠、使用成本低:
◆安装简单，视野宽阔，操作方便;
◆上下模板整体CNC加工,位置布局、加工尺寸精度高:
◆装模部件全部热处理，提高使用寿命:
◆左右位移由单伺服驱动精密丝杆，刚性连接，定位快速准确:
◆采用前后对夹设计，每个钳爪张开闭合独立调节、调整方便。定位快速准确;
◆采用准确值角度编码器读取冲床角度(机械手与冲床曲轴准确同步)保证了张开、闭合的准确性);
◆伺服系统选用了隔离三相电输入的驱动器( 排除了零线于扰、保证了伺服电机的定位精度);
◆机头和梁全部防水防尘全封闭结构，所有移动关节处加装防水防尘机构:
◆本产品采用自主研发的SANYE-JXS-4.0工业操作系统，执行元件之间的联动灵活、准确。可识别提示故障并报警全线停机的有:上料机/中频炉卡料，上料机/中频/冲床故魔、各工序的钳爪均可识别粘冲头、挂底芯、料没夹到、冲孔的料没打出钳子移动过程时发生干涉、机械手缺油、冲床缺油、高频缺水等故障。
◆Single head design,economical and low cost;
◆Simple installation,wide vision, easy operation;
◆CNC machining of Upper and lower templates,high precision of position layout and
machiningdimension;
◆All the parts of the mould are heat treated to increase the service life
◆Left and right displacement driven by a single servo precision screw,rigid connection,
positioning fast and accurate;
◆The absolute value angle encoder is used to read the punchangle(the manipulator and
the punchcrankshaft are absolutely synchronized). which ensures the accuracy of
opening and closing of the clamp claw
◆The servo system selects the driver which isolates the three-phase electrical input
leliminates thezero-line interference and ensures the positioning accuracy of the servo
motor)
◆The Machine Head and beam are all waterproof and dust-proof completely closed
structure,and all moving joints are equipped with waterproof and dust-proof mechanism;
◆This product uses the SANYE-JXS-4.0 industrial operating system,which is developed
independenty.The linkage between the executive components is flexible and accurate.
Can identify the fault and alarmall line shutdown,are:feeding machine/if furnace material,
feeding Machine/intermediatefrequency/punch failure,the clamp claw of each working
procedure can identify sticking punch,hanging bottom core,material not clamped,
punching material not punched out,the camp movement occurs during the
interference,manipulator oil shortage, punch oil shortage, high frequency water
shortage and so on.
