产品介绍
产品特点/Features:
◆整体外观全新设计，橙、灰色搭配，彰显严肃与谨慎:
◆采用双机头、双拉门设计，更加安全、视野宽阔，操作方便
◆上下模板整体CNC加工,位置布局、加工尺寸精度高:
◆装模部件全部热处理，提高使用寿命;
◆左右位移由双何服驱动精密丝杆，刚性连接，定位快速准确:
◆采用前后对夹设计，每个钳爪张开闭合独立调节、调整方便。定位快速准确;
◆采用准确值角度编码器读取冲床角度(机械手与冲床曲轴准确同步)(保证了张开、闭合的准确性;
◆伺服系统选用了隔离三相电输入的驱动器(排除了零线干扰、保证了伺服电机的定位精度);
◆机头和梁全部防水防尘全封闭结构，所有移动关节处加装防水防尘机构:
◆本产品采用自主研发的SANYE-JXS-4.0工业操作系统，执行元件之间的联动灵活、准确。可识别提示故障并报警全线停机的有上料机/中频炉卡料，上料机/中频/冲床故障、各工序的钳爪均可识别粘冲头、挂底芯、料没夹到、冲孔的料没打出、钳子移动过程时发生干涉、机械手缺油、冲床缺油、高频缺水等故障。
◆The overall appearance of the new design,orangegray collocation,highlighting serious and cautious;
◆Double head,double door designmore safewide field ofview easy to operate
◆Upper and lower template overall CNC machining.position layout,high precision machining dimension;
◆All molding parts are heat treated to improve service life;The left and right displacement is driven by double servo precision screw,rigid connection, fast and accurate positioning;
◆Front and back clamp design,each claw opening and closing independent adjustment,
easy adjustment.Fast and accurate positioning;
◆The absolute Angle encoder is used to read the Angle of the punching machine(the manipulator and the punching machine crankshaft are absolutely synchronized)(to ensure the accuracy of the opening and closing of the claw;
◆The servo system adopts the driver that isolates the three-phase electrical inputeliminates the interference of the neutral line and ensures the positioning accuracy of the servo motor):
◆The head and beam are all waterproof and dust-proof completely closed structure,and all moving joints are equipped with waterproof and dust-proof mechanism;
◆The product adopts the independently developed ANYE-JXS-4.0 industrial operating system,the linkage between the execution components is flexible and accurate.Can identify the prompt fault and alarm the shutdown of the whole line are:The feeding machine/intermediate frequency furnace stuck material, the feeding machine/intermediate frequency/punch failure,the pliers of each process can identify the sticking punch,the bottom core, the material is not caught,the punching material is not out,and the pliers moving process Interference,manipulator oi shortage, punch oil shortage, high frequency water shortage and other faults occur.
